2018

Steel Fabrication: Practical Tips for Smooth Acquisition of Custom Goods

Posted on

Custom steel fabrication can be highly profitable for your business. In simple terms, if you choose to manufacture unique goods, you can get ahead of your competitors in the sale of equipment parts, construction materials and general metal products. However, you should note that your gains will depend on the management of the custom fabrication project. If the work is not handled effectively, you might have to deal with delays, high expenses and low profits.…

Read More »

How You Can Prevent Electrode Sticking During Spot Welding Operations

Posted on

Some inexperienced people may notice that the electrode keeps sticking on the sheet material that they are trying to spot weld. That phenomenon is the result of some mistakes that could have been made prior to the commencement of the welding operation. This article discusses some of the things you can do to make sure that electrode sticking doesn’t occur as you weld. Align Electrodes Well The electrodes that you connect to the sheet material before you start the process of resistance spot welding must be properly aligned so that the current can flow uniformly through the material.…

Read More »

Why You Should Adopt Laser Cutting for Your Business Needs

Posted on

Laser cutting is a relatively new method, futuristic in some quarters even, that cuts metals and other materials using laser beams. The process of laser cutting is predominantly used in the industrial and manufacturing industry to cut structural and piping metals as well as flat sheets of metal. The laser – Light Amplification by Stimulated Emissions of Radiation – cuts through metals by either blowing, burning or melting the surface being cut.…

Read More »

4 Components of Laser Cutters That Need Frequent Cleaning

Posted on

Facilities with laser cutters may produce poor quality cuts due to improper equipment cleaning practices. This article discusses some components that you should clean in case the quality of your laser cuts has dropped. Gas Bottles Laser cuts can be compromised in case you forget to change the assist gas bottles at the right time. For instance, equipment manufacturers recommend changing the gas bottles once the pressure of the gas drops below a certain threshold.…

Read More »

4 Top Benefits of Formwork that New Contractors Must Bear in Mind

Posted on

Tropical and subtropical areas in Australia are plagued by heavy rainfall for atleast six months in a year. The wet months bring with them high humidity and flooding, which can negatively impact the structural integrity of buildings under construction. Ideally, construction should occur during dry months, but contractual timelines for construction contractors can cause projects to spill over to wet months. Therefore, contractors often use formwork or column-forming tubes, like Formatubes, for pouring concrete columns.…

Read More »

3 Options for Dealing With Waste at an Off-Grid Cabin or Home

Posted on

If you’re building on off-the-grid home, you won’t be connected to a municipal sewer system, and you’ll have to decide how you’re going to deal with your waste. There are a variety of options. Take a look. 1. Consider an Outhouse An outhouse works on a very simple premise. You dig a deep hole, you place a wooden stool above the hole, and you release your waste into the hole. You can also build a structure or outhouse around the stool for privacy.…

Read More »