Posts

3 Things to Know about Timber Skids versus Pallets

Posted on

If you are new to wood pallet upcycling and DIY projects, you may come across the terms timber skids and timber pallets. Though they sound like they would be the same, there are some major differences between the two items. In fact, these differences may greatly impact the DIY project you have in mind. Before you buy or order timber skids or pallets for upcycled projects, there are a few things you need to know about the differences between the two.…

Read More »

Don't Use Your Pulley Until You Read These Safety Tips

Posted on

Pulleys can be incredibly useful on work sites, but to keep your accident and emergency rate down, you need to use them carefully. Keep the following safety essentials in mind. 1. Follow the Weight Limits Before attaching anything to your pulley, check its safe working load. Note that this gives you the weight limit that the pulley can handle, but in most cases, that’s not a static weight limit. It often varies depending on the height, angle, or other factors related to the pulley.…

Read More »

Steel Fabrication: Practical Tips for Smooth Acquisition of Custom Goods

Posted on

Custom steel fabrication can be highly profitable for your business. In simple terms, if you choose to manufacture unique goods, you can get ahead of your competitors in the sale of equipment parts, construction materials and general metal products. However, you should note that your gains will depend on the management of the custom fabrication project. If the work is not handled effectively, you might have to deal with delays, high expenses and low profits.…

Read More »

How You Can Prevent Electrode Sticking During Spot Welding Operations

Posted on

Some inexperienced people may notice that the electrode keeps sticking on the sheet material that they are trying to spot weld. That phenomenon is the result of some mistakes that could have been made prior to the commencement of the welding operation. This article discusses some of the things you can do to make sure that electrode sticking doesn’t occur as you weld. Align Electrodes Well The electrodes that you connect to the sheet material before you start the process of resistance spot welding must be properly aligned so that the current can flow uniformly through the material.…

Read More »

Why You Should Adopt Laser Cutting for Your Business Needs

Posted on

Laser cutting is a relatively new method, futuristic in some quarters even, that cuts metals and other materials using laser beams. The process of laser cutting is predominantly used in the industrial and manufacturing industry to cut structural and piping metals as well as flat sheets of metal. The laser – Light Amplification by Stimulated Emissions of Radiation – cuts through metals by either blowing, burning or melting the surface being cut.…

Read More »

4 Components of Laser Cutters That Need Frequent Cleaning

Posted on

Facilities with laser cutters may produce poor quality cuts due to improper equipment cleaning practices. This article discusses some components that you should clean in case the quality of your laser cuts has dropped. Gas Bottles Laser cuts can be compromised in case you forget to change the assist gas bottles at the right time. For instance, equipment manufacturers recommend changing the gas bottles once the pressure of the gas drops below a certain threshold.…

Read More »

4 Top Benefits of Formwork that New Contractors Must Bear in Mind

Posted on

Tropical and subtropical areas in Australia are plagued by heavy rainfall for atleast six months in a year. The wet months bring with them high humidity and flooding, which can negatively impact the structural integrity of buildings under construction. Ideally, construction should occur during dry months, but contractual timelines for construction contractors can cause projects to spill over to wet months. Therefore, contractors often use formwork or column-forming tubes, like Formatubes, for pouring concrete columns.…

Read More »

3 Options for Dealing With Waste at an Off-Grid Cabin or Home

Posted on

If you’re building on off-the-grid home, you won’t be connected to a municipal sewer system, and you’ll have to decide how you’re going to deal with your waste. There are a variety of options. Take a look. 1. Consider an Outhouse An outhouse works on a very simple premise. You dig a deep hole, you place a wooden stool above the hole, and you release your waste into the hole. You can also build a structure or outhouse around the stool for privacy.…

Read More »

3 Ways TPV Santoprene Is Used in Your Home and What to Know

Posted on

There are few homeowners who know what TPV santoprene is and how it may affect their home. In fact, even fewer may be aware of how the material is used throughout the home and what they need to know about the various home applications. Here are three places TPV santoprene may be found in your home, what you need to know about it as it relates to each area, and if there are any issues you should know about with this material.…

Read More »

3 Reasons Why Your New Roof Could Fail (and How to Prevent It)

Posted on

Installing a roof is a big project for most property owners. A new roof presents the opportunity of realizing energy savings, giving your property’s exterior a new look, and creating additional space in the attic. However, what many people don’t anticipate when installing a new roof is the structure’s failure. A new roof can fail to deliver on functionality and aesthetics, and having this in mind can help you take the right measures to prevent the problems.…

Read More »